Double Shaft Mixing Machine
-
Payment
-
Origin
China Mainland
-
Minimum Order
5
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
Double shaft mixing machine is a kind of mixer machine, which is widely used for mixing of powder, granular, flake, block, irregular and sticky materials in the industries of feed, cereal, food, chemicals, medicine, pesticide,etc.
Our SSHJ Series double shaft high efficiency mixer machine synthesize essence of double shafts paddle mixer at home and abroad and develop, it is a kind of Low-speed, high efficiency, energy saving ideal mixing equipment. With high Mixing homogeneity, no mixing dead angle, short mixing period (30-120 seconds/batch)and mixing evenly. Entire-bottom type pneumatic big-door-open discharging, with fast discharging performance and at low material residue rate;Discharging with good seal and reliable,have no leakage.Loading with big variable range,equipped with grease adding pipe in machine body,could be appropriate to add a variety of liquids. The mixer with compact structure, beautiful shape, small space than other mixing equipment. Mixed fast and smooth, stable performance, low noise, no dust, no pollution, etc.
The machine consists of two rotors which in the opposite rotating direction, there are several special angle paddle welded on the rotor. On the one hand, paddle driving materials along machine intine for anticlockwise rotation, on the other hand, paddle driving materials turning around. The intersection overlap between two rotors form a weight loss zone, in this area, regardless materials shape, size and density can make the material floating and weightlessness at the moment, this makes the material in the machine tank to form all-wave continuous cycle turning, Intertwining and cutting, so as to achieve fast and smooth mixing efficiency.
Structure of double shaft mixing machine
1. Machine body 2. Spindle, paddle assembly 3. Hopper 4. Grease adding pipe 5. Chain tension wheel 6. Reducer 7. Chain wheel 8. Pneumatic door-opening structure 9. Door-hinge,door-arm,discharging door assembly
Rotor and and its driving
Rotor is composed of paddle, shaft and knighthead. Motor through reducer, chain drive the rotor to a certain speed operation, installed paddles in the double-shafts with a certain angle could spilled materials into the entire container. Materials in an instant weightless and extensive cross form a flow layer and mixing, material also prompt by paddles at same time. Along the shaft do radial motion thus form all-wave combined cycle.
Machine body
Machine body is W type. Both ends of machine body have a return duct,machine body connected by return duct, feeding and discharging material, the air discharged by material could circulating in this space, will not overflow outside the machine
Discharging door and seal device
Discharging door is composed of door-body, bracket arm and adjusting nut. It with seal parts around of discharging door, when the discharging door shut tight, rubber sealed strip which close to seal parts side of door to avoid material leakage. Sealed strip could be replaced when it damaged or aging. If necessary, adjust the location of adjusting nut to change the distance between bracket arm and door-body, to make discharging door keep a level with machine shell bottom circular surface and to seal.
Discharging control system
Discharging control system is composed of cylinder, connecting rod, universal driving shaft and travel switch. Discharging door installed on universal driving shaft, universal driving shaft connect with assistant driven rocker of connecting rod, cylinder head hinge with driven rocker. Cylinder reciprocated and to make universal driving shaft rotate through connecting rod, thereby driving discharging door open or close.
Liquid adding pipe
Liquid adding pipe installed on the top of machine body, it’s composed of pipe and nozzle, liquid sector sprayed by nozzle. Several nozzles distribute evenly on the machine shell. Inlet of pipe have flange and connect with oil supply system.
Double shaft mixing machine technical data
Model | Volume(m³) | Capacity | Mixing time per batch | Mixing homogeneity | Power |
SSHJ0.5 | 0.5 | 250 kg/batch | 30-120 second | cv%=5 | 5.5 Kw |
SSHJ1 | 1 | 500 kg/batch | 30-120 second | cv%=5 | 11 Kw |
SSHJ2 | 2 | 1000 kg/batch | 30-120 second | cv%=5 | 15 Kw |
SSHJ4 | 4 | 2000 kg/batch | 30-120 second | cv%=5 | 22 Kw |
SSHJ6 | 6 | 3000 kg/batch | 30-120 second | cv%=5 | 37 Kw |
- Ton Bag Bagging Machine 5 Pieces / (Min. Order)
- Vertical Mixer 5 Pieces / (Min. Order)
- Horizontal Pellet Cooler 5 Pieces / (Min. Order)
- Ton Bag Bagging Machine 5 Pieces / (Min. Order)
- Vertical Mixer 5 Pieces / (Min. Order)
- Horizontal Pellet Cooler 5 Pieces / (Min. Order)
- Flat Die Pellet Mill Spare Parts 5 Pieces / (Min. Order)
- Horizontal Ring Die Pellet Mill 5 Pieces / (Min. Order)
- Water Drop Hammer Mill 5 Pieces / (Min. Order)
- Hammer Mill 5 Pieces / (Min. Order)
- Wood Crusher Sawdust Making Machine 5 Pieces / (Min. Order)
- Flash Dryer 5 Pieces / (Min. Order)
- Rotary Drum Dryer 5 Pieces / (Min. Order)
- Disc Wood Chipper 5 Pieces / (Min. Order)
- Drum Wood Chipper 5 Pieces / (Min. Order)